DK - Modules for models and IR combat

Description of DK Unit

Board size: 50 x 50 x 14 mm

Characteristics:

Five modes of operation: test device, artillery, pillbox, bombardment, controlled unit.
Built-in modules for the IR combat system: IR receiver, IR transmitter, LED hit indicator, LED flash.
IR protocol compatibility: Tamiya, Heng Long, Taigen.
Support for up to 4 channels of radio control: shot, turret rotation, 2 channels with forwarding.
Servo support - barrel recoil and automatic turret rotation.
Sounds of shots, hits, air strikes. Built-in 3W audio amplifier, support for 4-8 ohm speakers.
Input voltage range from 6V to 9V. Supports 2S batteries (7.2 - 7.4V).
Pins for connecting LEDs: IR LED, hit indication, flash, machine gun, lighting.
Smoke machine support - activated when destroyed or fired.
Setting modes and parameters by pressing the button.
Volume control on the board.

Operating modes

Test device - IR shot through the button on the board, IR signal reception.
Artillery - shots at random from a large-caliber cannon with an IR signal. Configurable 3/5/7/9/12 HP.
Pillbox - random machine gun shots. There is a 10% chance that the shot will be accompanied by an IR signal. Configurable 3/5/7/9/12 HP.
Bombardment - after receiving an IR signal, a siren is triggered and after a while 3 IR shots are fired to the sound of a bomb explosion.
Controlled unit - shot and turret rotation are controlled by radio equipment (2 channels). Configurable 3/5/7/9/12 HP.

DK Unit

Autonomous unit control board for IR combat, modes available: artillery, pillbox, bombardment.

60 $

Contacts:

Facebook group

Purchase:

Online store DKLMRC

Detail

Connection example

Video about operating modes

Artillery Mode

Pillbox Mode

Bombardment Mode

Controlled unit Mode"

Add-ons for DK Unit

IR LED TSAL6200

A common IR transmitter for combat systems. LED diameter 5 mm. JR connector, 30 cm long.

3 $

IR LED TSAL6200 3x

Wide range IR transmitter. Suitable for example for a bombardment. The diameter of the LEDs is 5 mm. JR connector, 30 cm long.

5 $

IR LED narrow beam

IR transmitter for combat systems SFH4550 angle ± 3 °. The beam is slightly narrower than the TSAL6200. LED diameter 5 mm. JR connector, 30 cm long.

5 $

IR receiver unidirectional

IR receiver for combat systems. Receives a signal from one direction. Connector XH2.54 3 Pins, length 30 cm.

5 $

IR receiver omnidirectional

LF0038Q IR signal receiver for combat systems. Receives a signal from all directions. Suitable for covert installation of the IR combat system on the model. It has a high sensitivity, so it makes sense to cover most of the receiver, leaving a 1-2 mm gap in a circle. Connector XH2.54 3 Pins, length 30 cm.

7 $